Traxxas 82044-4 Blå TRX-4 Sport High Trail Edition 1/10 Scale
Tough, Lightweight Pickup Truck Body
- High-angle bumpers for increased clearance
- Molded grille and tailgate
- LED-ready headlights, tail lights
- Full Nylon composite wheel wells and floor pans
Scale Accessories
- Rugged Expedition Rack with detailed accessories
- Injection-molded snorkel and side mirrors
Clipless Body mounting
- Clipless design for smooth body appearance
- Rugged internal body cage for added rigidity
- Body details mount directly to internal frame
Trail-tuned XL-5™ HV Waterproof Electronic Speed Control
- Fully waterproof design
- Five drive profiles
- Sport Mode — forward / brake / reverse
- Race Mode — forward / brake / no reverse
- Training Mode™ - 50% forward / 100% brake / 50% reverse (patented)
- Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral
- Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake
- Traxxas EZ-Set® one-button setup
- Large, efficient heat sink
- Wide voltage latitude 6–7 cell NiMH (7.2–8.4 V) and 2–3s LiPo (7.4–11.1 V)
- Two stage low voltage protection (LVD)
Titan® 550 Motor
- Powerful Titan 21T reverse rotation motor with internal cooling fan
- Precision, preset gear mesh adjustments
- Motor retention separate from gear mesh
Portal Axles
- Increase ground clearance
- Eliminate torque twist
- Steel gears
- Improve axle geometry and reduce strain on driveshafts
Drivetrain
- Full-time shaft driven 4-wheel drive
- Tough 6 mm stub axles
- Steel front CV driveshafts
- Hardened steel rear axle shafts
- Spool-locked front and rear differentials
- Steel gear transfer case
Factory-Installed Long Arm Lift Kit
- Increases ground clearance over 1″
- Maintains precise steering geometry
- Accommodates oversize 2.2″ wheels and tires
TQ™ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Patented O-ring sealed watertight receiver box keeps the micro receiver dry
Reinforced Steel Ladder Frame
- Full-length 1.5 mm thick steel frame rails
- Bumpers adjust fore and aft
- Rugged rock rails adjust for width
- Wire routing clips integrated into frame rails
Innovative Battery Compartment
- Hinged battery strap allows quick and easy battery access
- No pins to lose
- Accommodates different height batteries
- Accepts full-size long battery packs
- Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
Transmission
- Single-speed with steel gears
- Dual horizontal shafts
- Twin friction plate slipper clutch
- Easily removed for servicing
Steering
- Chassis mounted 2075X metal gear digital servo
- Superior 45° steering angle
- Direct steering (no servo saver)
- Steering geometry corrected for bump steer
Suspension
- Front — 3 link with panhard
- Rear — Triangulated 4 link
- Heavy-duty rod ends with steel hollow balls
- 5 mm diameter steel link rods with 4 mm threaded ends
Extended Aluminum GTS Shocks
- Oil-filled coilover GTS shocks
- Extra-long aluminum bodies for greater articulation
- Silver-anodized aluminum bodies
- Threaded bodies with collars easily adjust ride height
- Silky smooth damping for the toughest trails
- O-ring cap seal and dual X-ring shaft seals
Oversize Wheels and Tires
- 2.2” 5-spoke wheels with replica beadlock rings
- Pre-mounted 2.2” Canyon Trail tires with trail-tuned foam inserts
- Trail tuned S1 rubber compound
- 12 mm steel hex
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
- Requires Battery and Charger (Sold Separately)
Spec:
Length: |
22 inches (564 mm) |
Front Track: |
10.6 inches (270 mm) |
Rear Track: |
10.6 inches (270 mm) |
Center Ground Clearance: |
4 inches (99 mm) |
Weight (w/o battery): |
7.04 pounds (3.20 kg) |
Height (overall): |
10.8 inches (275 mm) |
Wheelbase: |
12.3 inches (312 mm) |
Approach Angle: |
62.8° |
Departure Angle: |
54.7° |
Breakover Angle: |
79.3° |
Front Shock Length: |
4.33 inches (110 mm) |
Rear Shock Length: |
4.33 inches (110 mm) |
Front Wheels: |
2.2″ x 1.34″ (56 x 34 mm) |
Rear Wheels: |
2.2″ x 1.34″ (56 x 34 mm) |
Front Tires: |
5.3″ x 2.14″ (135 x 54 mm) |
Rear Tires: |
5.3″ x 2.14″ (135 x 54 mm) |
Hex Size: |
12 mm |
Speed Control: |
XL-5™ HV |
Motor (electric): |
21T reverse rotation |
Transmission: |
Single speed |
Gear Pitch: |
32 pitch |
Differential Type: |
Spool (no differential) |
Chassis Structure / Material: |
Steel ladder frame with Nylon composite crossmembers |
Brake Type: |
Electronic “Hill Hold” |
Drive System: |
Shaft driven 4WD |
Steering: |
Chassis mounted servo |
Servo: |
2075X metal gear |
Transmitter: |
TQ™ 2.4 GHz 2-channel transmitter |
Receiver: |
6519 |
Skill Level: |
1 |
Battery Tray: |
159 L x 47 W x 23/26 mm H |