SamiRC
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Tamiya 58418 1/10 Boomerang 2008 4WD Buggy Kit No ESC

Art.nr: 58418
2.495,- 2.695,- -7%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Tamiya
På lager: 1

 

Relive your childhood with this fan favorite!

The 1/10, electric Boomerang 2008 4WD Kit recreates the beloved 1980s-era buggy and fine-tunes it with today’s most-wanted features! Not only does it offer improved steering and bump-absorbing shocks, but it also features a more efficient gearbox, driveshafts and axle joints than the original. A chassis cover prevents dirt and debris from interfering with your fun. Add your favorite 2-channel radio, 6-cell NiMH battery and charger and you're good to go!
  • ABS resin bathtub chassis.
  • Four-wheel shaft drive.
  • 540-size motor.
  • Clear polycarbonate body.
  • Three plastic oil shocks.
  • Bellcrank steering with servo saver.
  • Enclosed gearbox.
  • Blade-type front bumper with decal sheet.
  • 3.48" (88.5 mm) outer diameter, 2" (50 mm) inner diameter, 1" (25.4 mm) wide semi-pneumatic Super Gripper tires in front; 3.54" (90 mm) outer diameter, 2" (50 mm) inner diameter, 1.5" (37 mm) wide semi-pneumatic Super Gripper tires in back.
  • White nylon resin 5-hole wheels.
  • Non-adjustable camber.
  • Adjustable toe-in via steering tie rods.
 
This is the electric powered, radio controlled, 1/10 scale Tamiya Boomerang Buggy kit.
 
FEATURES
 
Chassis: ABS resin bathtub type
 
Drive: Four wheel shaft
 
Motor: 540 size
 
Electronic Speed Control: Not included
 
Shocks: Three plastic bodied, oil filled
 
Gearbox: Enclosed
 
Bumper: Front blade type
 
Body: Clear polycarbonate
 
Wheels: Nylon resin 5 hole design, white in color
 
Tires:
 
Front Semi Pneumatic Super Gripper Tires: outer diameter:3.5" (88.5mm), inner diameter: 2" (50mm), width: 1" (25.4mm)
 
Rear Semi Pneumatic Super Gripper Tires: outer diameter: 3.5"(90mm), inner diameter: 2" (52.6mm), width: 1.5" (37mm)
 
Steering: Bell crank type with servo saver
 
Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
 
Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
 
INCLUDES
1/10 scale Tamiya Boomerang Buggy kit with body, 540 motor, instruction manual, decal sheet
 
REQUIREMENTS
 
Radio: 2-ch with one standard servo
 
ESC: After choice
 
Radio Batteries: 8 AA
 
Battery: 6-cell stick pack
 
Battery Charger: Timed or peak for 6-cell battery
 
Polycarbonate safe paint and building and track equipment
 
SPECIFICATIONS
 
CHASSIS
Length: 245mm (9.6")
Width: 93mm (3.7")
Height: 76mm (3")
 
BODY
Length: 10" (254mm)
Width: 5.25" (133mm)
Height: 2.75" (70mm)
Tamiya

Tamiya

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

Trykk ENTER for å søke