SamiRC
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

RC4WD 0006 King Off-Road Racing Shocks (80mm)

Art.nr: D0006
749,- 799,- -6%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

På lager: 4

RC4WD King Off-Road Racing Shocks (80mm)

 

These are officially licensed from King Off-Road Shocks. These new shocks feature a completely new design from the ground up and are built to handle rough and rocky terrains. Bolt up and upgrade your scale build with a new set of these realistic-looking shocks!

 

 

Specifications:

  • Machined Billet Aluminum
  • King Laser Etched on Top Cap and Retainer Ring
  • Dual Spring Design
  • X-ring Gaskets
  • Titanium Nitride Coated Shock Shafts
  • Hole to Hole (Compressed): 2.44in / 62mm
  • Hole to Hole (Uncompressed): 3.14in /80mm
  • Overall Length: 3.54in / 90mm
  • Travel Length: 0.70in / 18.0mm
  • Shock Body OD: 0.57in / 14.6mm
  • Shaft OD: 0.15in / 3.9mm
  • Each Shock Weighs: 0.65oz / 18.7g

 

 

 

 

 

 

Shown installed on RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set with Chubby Mini 3 TON Scale Jack Stands (Z-S0731) for example (Not Included)

 

 

 

What's Included:

  • 2x RC4WD King Off-Road Racing Shocks (80mm)
  • 2x White Shaft Guides
  • 4x 3 x 5.5 x 2.7mm Black Spaces
  • 2x 3 x 5.5 x 2mm Black Spaces
  • 1x King Decal Sheet

 

Optional Lengths:

 

Notes:

  • Designed with Titanium Nitride (TiN) shock shafts for long term wearability.
  • X-ring Gaskets provide double the oil seals in the shock cartridge.
  • Ball ends are a direct fit for Traxxas TRX-4 axle and shock hoop mounts.
  • Shocks do not come with oil. It is highly recommended to build the shocks with silicone shock oil and thick shock grease on the x-rings for maximum performance.
  • Additional X-ring spacers are included to fine tune the shocks. A 2.7mm spacer is installed in the shocks providing maximum sealing compression. The 2.5mm spacer can be used allowing the shaft to move easier through the X-rings.
  • Fits Traxxas TRX-4 Land Rover Defender
  • Fits Traxxas TRX-4 '79 Bronco Ranger XLT
  • Fits Traxxas TRX-4 Sport Kit
  • Fits Traxxas TRX-4 Sport
  • Fits Traxxas TRX-4 Crawler Kit
  • Fits Traxxas TRX-4 Mercedes-Benz G 500 4x4
  • Fits Traxxas TRX-4 Chevrolet K5 Blazer
  • Fits Traxxas TRX-6 Mercedes-Benz G 63 6x6
  • Fits RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set (Autobiography Limited Edition) (Z-RTR0043)
  • Fits RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set (Heritage Edition) (Z-RTR0044)

  • Fits RC4WD Gelande II RTR Truck w/Cruiser Body Set (Red) (Z-RTR0047)

  • Fits RC4WD Gelande II Truck Kit w/Cruiser Body Set (Z-K0051)

  • Fits RC4WD Gelande II Truck Kit 1/10 Chassis Kit (Z-K0060)

  • Fits RC4WD Gelande II Kit w/ 2015 Land Rover Defender D90 Hard Body Set (Z-K0064)

  • When installing on Axial SCX10-3 please use a 5mm Black Spacer with M3 Hole (Z-S0821) on the shock tower.

 

King Off-Road is a registered trademark of the King Off-Road Shock company. The King Off-Road logo is property of King Off-Road Shocks and used under license by RC4WD.

Relaterte produkter

Trykk ENTER for å søke