Castle Creations 010015502 Mamba X 25.2 WP ESC/1406-5700kV Motor

Art.nr: 010-0155-02

3.795,- ~~3.995,-~~ -5%

Du vil motta en e-post så snart produktet er på lager!

En ukjent feil har oppstått. Prøve igjen

Castle Creations

På lager: 1

Informasjon
Produsent

This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC, and the 1406 5700Kv Sensored Brushless Motor.

NOT for use in 4WD short course trucks.

For 2WD short course trucks on 2S LiPos geared conservatively, 1/10 scale 2WD stadium trucks and buggies on 2S for bashing and limited runs on 3S LiPos with conservative gearing, also ideal for 1/10 scale on road cars running on 2S and 3S LiPo power.

FEATURES

ESC;

2S - 6S input voltage range

Compatible with 1/10 - 1/8 scale vehicles weighing less that 9lbs(4kg), including many extreme 1/10 scale setups and 1/8 scale racebuggies

Smartsense uses motor's sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorlessmode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditions

On-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while driving

Recordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and more

Audible alerts

CNC aluminum case

12AWG high strand count silicone insulated battery wires

Motor;

High-strength neodymium sintered magnet with Kevlar wrap

High-performance 0.2mm steel lamination stacked stator

Castle 13 AWG silicone insulated wire leads

Oversized NMB bearings

Four pole configuration for maximum efficiency at high RPM

CNC machined 6061-T6 aluminum front and rear endbells

INCLUDES

Mamba X Extreme 1/10 scale Electronic Speed Control

Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector, and Waterproof Switch

Replaceable Motor Sensor Harness

12AWG Battery Wires

Cooling Fan

4mm Gold Plated Bullet Motor Connectors

1406 5700Kv Sensored Brushless Motor

Sensor Wire

SPECIFICATIONS

ESC;

Input Voltage Range: 2S - 6S LiPo

BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V

Programmable: Fully programmable with Castle Link USB Adapter, and downloadable Casle Link Windows software

Telemetry Link Capable: Yes

Brake: Proportional

Reverse: Yes, may be disabled for racing

Cooling Fan: 1.2" (30mm) removable

Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)

Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to run

Motor;

Input Voltage Range: 2-3S LiPo,

Kv: 5700

Max. RPM: 100,000

Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTR

Length: 1.9" (49.5mm)

Diameter: 1.4" (36mm)

Weight with Wires: 7.1oz (202g)

Shaft Diameter: 1/8" (3.17mm)

Shaft Length: 0.59" (15mm)

Mounting Hole Specifications: M3 @ 25mm

Connectors: 4mm Male Castle Bullet

COMMENTS

Waterproof under normal operation. Not intended for operation when completely submerged in water.

Castle Creations

Castle Creations makes the best electronic speed controllers in the industry, possibly the world! Our engineers have spent countless hours integrating features and firmware that no other manufacturers can match.

Speed Controllers enabled with SmartSense use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat.