"BULK" BSD Brushless ESC 50A WP-10BL50-RTR Waterproof 2-3S

Art.nr: BULK WP-10BL50-RTR

799,- ~~849,-~~ -6%

Du vil motta en e-post så snart produktet er på lager!

En ukjent feil har oppstått. Prøve igjen

BSD

** Ikke på lager

Informasjon
Produsent

Brushless ESC 50A WP-10BL50-RTR Waterproof 2-3S for RC Car

* This is a Brand new item taken from a kit (chopped part), therefore will not have a BSD packaging *

Product Description

WP10-BL50 Brushless 50A Sport ESC for RC Car or Truck with DEANS T-Plug connector

Hobbywings latest series of waterproof brushless Speed Controller series and is the 50A (300A) sensorless version fitted with a Deans T-Plug battery connector.

Features:

Water-proof and dust-proof for all-weather races. (Note: please remove the cooling fan before using this ESC in water; clean and dry it soon after the use for avoiding the connectors get rusty.)
External programming port, easy to connect to the Program Card when setting the ESC.
Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.
9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit for different kinds of models, tires and tracks.
Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection.
One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.
Compatible with the optional device "HW-LED-PC2C" the portable Digital LED Program Box, especially convenient for outdoor use.

Programmable Items

1. Run Mode: Forward/Brake - Forward/Reverse/Brake - Forward/Reverse.
2. Drag Brake Force: 0%, 5%, 10%, 20%, 40%, 60%, 80%, 100%
3. Low Voltage Cut off: Disabled, 2.6V/Cell, 2.8V/Cell, 3.0V/Cell, 3.2V/Cell, 3.4V/Cell
4. Start Mode (Punch): 9 levels (default is 5)
5. Max Brake Force: 25%, 50%, 75%, 100%, Disabled
6. Max. Reverse Force: 25%, 50%, 75%, 100%
7. Initial Brake Force: (=drag force), 0%, 20%, 40%
8. Throttle Range: 6%, 9%, 12%
9. Timing: 0.00°, 3.75°, 7.50°, 11.25°, 15.0°, 18.75°, 22.5°, 26.25°

Specifications

Current - 50A Continuous - 300A Peak
Input - 4-9 Cells NiMh, or 2-3S Lipo
BEC Output - 6V/3A (Switch Mode)
Resistance - 0.0010 Ohm

Motor Supported - Sensorless Brushless Motor (compatible with sensored motor but not in sensored operating mode)
Cooling Fan - Gets working voltage from battery directly without regulating, the stock fan can work with 2S and 3S Lipo.
Size - 48.5(L)X38(W)X32(H)mm
Weight - 90g

Motor Limit - For 2S Lipo or 6 cells NiMH
On-road: 3650-size or smaller motor with a KV <6000
Off-road/Buggy/Monster: 3650-size or smaller motor with the KV<4000

Motor Limit - For 3S Lipo or 9 cells NiMH:
On-road: 3650-size or smaller motor with a KV<4000
Off-road/Buggy/Monster: 3650-size or smaller motor with a KV<3000

HSP Models Applicable - 1:10 On-road/Off-road/Buggy/Monster Truck/ SCT

Motor connectors: 4mm female bullet.

Battery connector: T-Plug (Deans) fitted.